CE, UKCA and NRTL explained for process equipment
Process tools carry a confusing mix of marks: CE, UKCA, ETL, UL, TÜV and SEMI S2 among them. They don’t all mean the same thing, and some matter in Europe while others matter only in North America. This guide explains what each one covers and what to ask your supplier for. It’s a general guide, so check your site’s own requirements and the current official guidance before you rely on it.
CE marking
In the EU, most process equipment must be CE marked before it’s sold or put into service. For a spin coater, bake plate or workstation, the main legislation is the Machinery Directive (2006/42/EC), together with the EMC Directive. Equipment that isn’t machinery may fall under the Low Voltage Directive instead.
CE marking is a declaration by the manufacturer that the product meets the essential requirements. For most process tools the manufacturer assesses this themselves, keeps a technical file for at least ten years and issues an EU declaration of conformity. The tool should arrive with:
- the CE mark on the equipment
- an EU declaration of conformity listing the legislation and standards applied
- instructions in the language of the country of use
The EU Machinery Regulation from 2027
The EU Machinery Regulation (EU) 2023/1230 replaces the Machinery Directive and applies from 20 January 2027. For buyers, the main changes are:
- instructions and the declaration of conformity can be supplied digitally, with paper on request
- a defined list of higher-risk machinery needs third-party assessment
- clearer rules on when modifying a machine makes it a new product that needs reassessment
Most spin coaters and bake plates are expected to stay under self-assessment, but buyers should check how their supplier is preparing.
UKCA and Great Britain
UKCA is the GB equivalent of CE marking. The UK government has said it will continue to recognise CE marking in Great Britain, so CE-marked process equipment can be sold and used in GB, and UKCA remains available as an alternative. The government has also said it intends to bring GB machinery law into line with the new EU Machinery Regulation, but the timing hasn’t been fixed. Because these rules are still moving, check the current GOV.UK guidance when you buy.
Northern Ireland follows EU rules, so CE marking applies there.
NRTL marks: ETL, UL, TÜV and others
In the US, OSHA recognises Nationally Recognized Testing Laboratories (NRTLs) to certify equipment for use in American workplaces. ETL (Intertek), UL, CSA and TÜV SÜD are among them, and “cETLus” or “cULus” marks cover the US and Canada. These marks matter to North American sites. In the UK and Europe they’re a useful sign of independent testing, but they don’t replace CE marking.
SEMI S2
SEMI S2 is a voluntary environmental, health and safety guideline for semiconductor equipment. It isn’t a legal requirement anywhere, but many fabs ask for an S2 assessment report before they’ll install a tool. Ask early if your site needs one.
What to ask your supplier for
- the EU declaration of conformity, and confirmation of the legislation it covers
- instructions in your language
- a summary of the risk assessment, if your safety team needs it
- NRTL or SEMI S2 reports, if your site requires them
- airflow and exhaust data from commissioning, which becomes the baseline for your LEV tests
Our guide to planning a lithography workstation covers exhaust and LEV testing.
How SiSTEM can help
CEE’s Apogee tools and the X-Pro II workstation are CE marked, and CEE also hold North American certification: Apogee spin coaters and developers carry ETL listing through Intertek, and the X-Pro II is certified through TÜV SÜD. We supply the declaration of conformity and instructions with every tool, and our after-sales team commissions it on site. Ask us if your site needs anything more.