Research Library: Published Work Using CEE Equipment

Researchers, cleanrooms and manufacturers around the world have published work that uses CEE spin coaters, bake plates, developers and bonding tools. This library brings that work together in one place, with a short summary of each entry written by our team and a link to the original paper, patent, thesis or facility page.

Search by keyword, or filter by equipment, application, material, document type or substrate. If you’d like to talk through a process you’ve found here, get in touch and we’ll go through it with you and CEE’s applications team.

Paper · 2024 · PubMed Central

Novel Etch-Resistant Molecular Glass Photoresist Based on Pyrene Derivatives for Electron Beam Lithography

Pyrene-based molecular glass resists were developed for electron-beam lithography with good etch resistance. Resist films were spun onto primed silicon on a Cee 200X, then baked, exposed and developed.

Equipment: Cee 200X
Application: Lithography, Nanofabrication
Materials: Photoresist
Substrate: Si

Paper · 2023 · PubMed Central

Cell-Free Synthesis Goes Electric: Dual Optical and Electronic Biosensor via Direct Channel Integration into a Supported Membrane Electrode

A biosensor combining optical and electrical readout was built on a supported membrane, with ion channels made by cell-free synthesis. An Apogee spin coater applied the conductive PEDOT:PSS electrode layer to glass and patterned ITO.

Equipment: Apogee spin coater
Application: Bio Sensing Devices
Materials: PEDOT:PSS
Substrate: Glass

Paper · 2022 · PubMed Central

Molecular Glass Resists Based on Tetraphenylsilane Derivatives: Effect of Protecting Ratios on Advanced Lithography

Tetraphenylsilane-based molecular glass resists were tested for electron-beam and EUV lithography, comparing how the level of protecting groups affects performance. The resist films were coated on a Cee 200X.

Equipment: Cee 200X
Application: Lithography, Nanofabrication
Materials: Photoresist

Patent · 2024 · Google Patents

Spin-coatable metal doped silicon-containing film-forming compositions and processes of using them for deposition

Metal-doped, silicon-containing films that can be spun on are described for patterning and hard mask use. The formulations were filtered and then coated on a Cee 200X in the worked examples.

Equipment: Cee 200X
Application: Material Science

Paper · 2017 · PubMed Central

Reconfigurable Microfluidic Magnetic Valve Arrays: Towards a Radiotherapy-Compatible Spheroid Culture Platform for the Combinatorial Screening of Cancer Therapies

Arrays of magnetic microvalves were built into a microfluidic platform for growing tumour spheroids that can be irradiated in place. A Cee 200CBX spun the PDMS membrane layer onto a silanised glass wafer.

Equipment: Cee 200CBX
Application: Bio, Microfluidics
Materials: PDMS
Substrate: Glass

Procedure or protocol · 2015 · MIT Fabtools

develop-Brewer Hotplate and Develop Station Standard Operating Procedure

A facility operating procedure for a combined hotplate and develop station. It covers spray and puddle development with front and back rinses, plus post-exposure, image reversal and hard bakes, run on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Lithography
Materials: CD-26 developer, Developer, DI Water

Paper · 2020 · PubMed Central

Application of the Metal Reflector for Redistributing the Focusing Intensity of SPPs

Plasmonic structures were made to redirect the focusing intensity of surface plasmon polaritons using a metal reflector. Thin resist films were coated on a Cee 200X and dried on a Cee 1300X hotplate.

Equipment: Cee 1300X, Cee 200X
Application: Photonics
Materials: Photoresist

Paper · 2025 · Royal Society of Chemistry

Lithographic performances of aryl sulfonate ester-modified polystyrenes as nonchemically amplified resists

Polystyrenes modified with aryl sulfonate esters were assessed as resists that work without chemical amplification, for electron-beam and EUV patterning. Films were coated on a Cee 200X and baked on an Apogee bake plate.

Equipment: Cee 200X
Application: Lithography
Materials: Photoresist, Polystyrene

Paper · 2016 · ScienceDirect

Sn-doped ZnO nanocrystalline thin films with enhanced linear and nonlinear optical properties for optoelectronic applications

Zinc oxide thin films, pure and tin-doped, were deposited on glass to improve their linear and nonlinear optical properties. The films were spun on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Photonics
Substrate: Glass

Paper · 2021 · Wiley Online Library

Dexamethasone (DXM)-Coated Poly(lactic-co-glycolic acid) (PLGA) Microneedles as an Improved Drug Delivery System for Intracochlear Biodegradable Devices

Biodegradable PLGA microneedles carrying dexamethasone were made for drug delivery into the inner ear. The master moulds started as a thick SU-8 layer spun onto silicon on a Cee 200X.

Equipment: Cee 200X
Application: Bio, Microfabrication
Materials: SU-8
Substrate: Si

Patent · 2005 · Google Patents

Directly photodefinable polymer compositions and methods thereof

A polymer that can be patterned directly with light, without a separate resist, is described. Wafers were coated on a Cee 100CB using a two-stage spin.

Equipment: Cee 100CB
Application: Lithography
Materials: Photoresist

Patent · 2005 · Google Patents

Curable high refractive index resins for optoelectronic applications

High refractive index resins that cure under UV are described for optoelectronic devices. The resin was spun and baked on a Cee 100CB coater and hotplate before exposure and optical testing.

Equipment: Cee 100CB
Application: Photonics

Patent · 2011 · Google Patents

Double coating procedure for the membranes of bioartificial kidneys

A two-step coating method for polymer membranes used in a bioartificial kidney. Polymer solutions were spun onto silicon on a Cee 100CB coat and bake system before going into a water bath to form the membrane.

Equipment: Cee 100CB
Application: Bio
Substrate: Si

Patent · 2008 · Google Patents

Two-layer transparent electrostatic charge dissipating coating

A transparent, two-layer coating that dissipates static charge is described, together with its electrical testing. Test panels were coated on a Cee 100CB.

Equipment: Cee 100CB
Application: Material Science

Patent · 1999 · Google Patents

Photoresists, polymers and methods of microlithography

New photoresist polymers for microlithography are described. Test films were spun and baked on six-inch silicon wafers using a Cee 100CB spinner and hotplate.

Equipment: Cee 100CB
Application: Lithography
Materials: Photoresist
Substrate: Si, 150 mm

Paper · 2021 · ACS Publications

Multiple Linear Regression Modeling of Nanosphere Self-Assembly via Spin Coating

Statistical modelling was used to find spin conditions that give the best coverage and hexagonal packing of polystyrene nanospheres. The nanosphere coatings were spun on a Cee 100.

Equipment: Cee 100
Application: Material Science, Nanofabrication
Materials: Polystyrene

Paper · 2020 · KAUST Repository

Biomembrane-based organic electronic devices for ligand-receptor binding studies

Organic electronic devices with a lipid bilayer on top were built to measure how ligands bind to membrane receptors. An Apogee spin coater applied the PEDOT:PSS electrodes.

Equipment: Apogee spin coater
Application: Bio Sensing Devices
Materials: PEDOT:PSS

Thesis · TU Ilmenau Thesis

Fabrication and characterization of self-sensing and self-actuating piezoresistive microscale silicon cantilevers for an integrated scanning probe microscopy and scanning electron microscopy system

Silicon cantilevers that sense and drive their own motion were made for combined scanning probe and electron microscopy. The lithography used a Cee 100CB with adhesion promoter and positive resist.

Equipment: Cee 100CB
Application: Microfabrication
Materials: Photoresist
Substrate: Si

Patent · 2025 · Google Patents

Solubility switch topographic fill materials and methods

Spin-on fill materials are described that level deep topography on a wafer and then switch solubility for selective removal. Cee spinners and hotplates were used to prepare the fill layers.

Equipment: Cee spin coater (model not given), Cee hotplate (model not given)
Application: Advanced Packaging, Material Science

Patent · 2014 · Google Patents

Apparatus, hybrid laminated body, method, and materials for temporary substrate support

Temporary support for thin substrates using a laminated stack with a polyamide priming layer. A Cee spin coater applied the thermoplastic priming layer to the wafer.

Equipment: Cee spin coater (model not given)
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive

Paper · 2019 · ScienceDirect

Evaporation of water droplets on photoresist surfaces – An experimental study of contact line pinning and evaporation residues

How water droplets pin and evaporate on photoresist was studied to understand water marks in immersion lithography. Deep-UV resist was coated on silicon with a Cee 200X.

Equipment: Cee 200X
Application: Lithography, Material Science
Materials: Photoresist
Substrate: Si

Patent · 2014 · Google Patents

Method and apparatus for providing a substrate and a protective coating on the substrate

A UV-cured protective coating for glass substrates is described. The glass was cleaned with UV-ozone and then coated on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Material Science
Substrate: Glass

Patent · 2016 · Google Patents

Polymers of maleimide and cycloolefin monomers as permanent dielectrics

Light-sensitive polymers made from maleimide and cycloolefin monomers are described as permanent dielectric layers. The films were spun on a Cee 200CB.

Equipment: Cee 200CB
Application: Advanced Packaging, Lithography
Materials: Photoresist

Patent · 2004 · Google Patents

Large colloidal crystals and macroporous polymers and methods for their production

Large silica colloidal crystals were made by spin coating and then used as templates for porous polymers. The colloidal dispersions were spun onto wafers on a Cee 100.

Equipment: Cee 100
Application: Material Science, Nanofabrication

Patent · 2003 · Google Patents

Fluorinated polymers having polycyclic groups with fused 4-membered cyclic carbon useful as photoresists and methods for microlithographic printing

Fluorinated photoresist polymers with fused ring structures are described, along with how they coat and develop. Four-inch silicon wafers were coated on a Cee 100CB spinner and hotplate.

Equipment: Cee 100CB
Application: Lithography
Materials: Photoresist
Substrate: Si, 100 mm

Paper · 2022 · PubMed Central

Industrial applications of sol–gel derived coatings

A review of industrial sol-gel coatings, including multilayer optical stacks. In one coating trial, a Cee 200X applied the first refractive index layer before curing.

Equipment: Cee 200X
Application: Material Science, Photonics

Patent · 2003 · Google Patents

Optical devices made from radiation curable fluorinated compositions

Optical devices with cladding layers made from radiation-curable fluorinated materials. The optical layers were spun onto wafers using Cee equipment.

Equipment: Cee spin coater (model not given)
Application: Photonics

Patent · 2023 · Google Patents

Method of coating a superstrate

A method for coating fused silica superstrates, the plates used to planarise films in nanoimprint-style processes. Fused silica wafers were coated on a Cee 300X.

Equipment: Cee 300X
Application: Lithography
Substrate: Glass

Paper · 2019 · PubMed Central

From 2D to 3D: Strain- and elongation-free topological transformations of optoelectronic circuits

Optoelectronic circuits were folded from flat sheets into 3D shapes without stretching. A Cee 100CB spun the thin PDMS membranes on silicon and applied the optical adhesive layer.

Equipment: Cee 100CB
Application: Flexible Electronics, Photonics
Materials: PDMS
Substrate: Si

Paper · 2025 · Wiley Online Library

Biocompatible Porphyrin Derivatives Electron Beam and Extreme Ultraviolet Photoresists: High Resolution and High Etch Resistance

Porphyrin-based resists were developed for high-resolution electron-beam and EUV lithography. Filtered resist solutions were coated onto silicon on a Cee 200X.

Equipment: Cee 200X
Application: Lithography, Nanofabrication
Materials: Photoresist
Substrate: Si

Patent · 2013 · Google Patents

Room Temperature Debonding Composition, Method and Stack

A temporary bonding stack that releases at room temperature is described. A Cee 100CB coated and baked the polymer layers in the worked examples.

Equipment: Cee 100CB
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive

Patent · 2011 · Google Patents

Surface treatments for alignment of block copolymers

Cross-linked surface treatments are described that control how block copolymers line up for directed self-assembly. The films were coated and baked on a Cee 100CB.

Equipment: Cee 100CB
Application: Lithography, Nanofabrication

Paper · 2010 · PubMed Central

Automated Targeting of Cells to Electrochemical Electrodes Using a Surface Chemistry Approach for the Measurement of Quantal Exocytosis

Electrodes were patterned so that single cells could be placed on them automatically to measure exocytosis. The S1813 resist was spun on a Cee 100 before patterning.

Equipment: Cee 100
Application: Bio Sensing Devices
Materials: S1813

Patent · 2009 · Google Patents

Carrier solvent compositions, coatings compositions, and methods to produce thick polymer coatings

Solvent blends for making thick novolac and polyhydroxystyrene coatings in one pass. Films were coated on a Cee 100CB and soft baked.

Equipment: Cee 100CB
Application: Material Science

Patent · 2000 · Google Patents

Fast drying thick film negative photoresist

A thick SU-8 negative resist that dries faster thanks to a cyclopentanone solvent. The resist was dispensed onto silicon held on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Lithography
Materials: SU-8
Substrate: Si

Paper · 2007 · University of Michigan Deep Blue

Polyelectrolyte-Clay-Protein Layer Films on Microfluidic PDMS Bioreactor Surfaces for Primary Murine Bone Marrow Culture

A microfluidic PDMS bioreactor was coated with layered films to culture primary bone marrow cells. The thin PDMS base membrane was spun on a Cee 100 and cured.

Equipment: Cee 100
Application: Bio, Microfluidics
Materials: PDMS

Thesis · 2020 · African University of Science and Technology Thesis

Effect of annealing on the Morphological and Optoelectronic Properties of CH3NH3PbI3 Thin Films for Perovskite Solar Cell Applications

How annealing affects the structure and optical behaviour of methylammonium lead iodide films for perovskite solar cells. The films were deposited on a Cee spin coater with a three-stage recipe.

Equipment: Cee spin coater (model not given)
Application: Material Science

Thesis · 2025 · UNC Charlotte Doctoral Thesis

Transport Properties of II-VI Organic-Inorganic Hybrid Semiconductors

Lateral test devices were built to measure charge transport in hybrid organic-inorganic semiconductors. SU-8 was coated on a Cee 200 and given a two-step prebake on a Cee 1100FX hotplate.

Equipment: Cee 1100FX, Cee 200
Application: Material Science
Materials: SU-8
Substrate: Si

Paper · 2024 · MRC Laboratory of Molecular Biology

Honeycomb gold specimen supports enabling orthogonal focussed ion beam-milling of elongated cells for cryo-ET

Gold honeycomb supports were made to hold long cells upright for ion-beam milling before cryo-electron tomography. An Apogee 450 coated the OmniCoat underlayer on a copper-coated four-inch wafer at 500 rpm, then 3000 rpm.

Equipment: Apogee 450 spin coater
Application: Bio, Nanofabrication

Patent · 2014 · Justia Patents

Orthogonal solvents and compatible photoresists for the photolithographic patterning of organic electronic devices

Photolithography for organic electronics using solvents that leave the organic layers untouched. Spin coating was done on Cee equipment fitted with a lid.

Equipment: Cee spin coater (model not given)
Application: Lithography
Materials: Photoresist

Procedure or protocol · 2017 · Nature Protocols

Visualizing endocytic recycling and trafficking in live neurons by subdiffractional tracking of internalized molecules

A protocol for tracking recycling of membrane proteins in live neurons at very high resolution. The microfluidic culture devices were made with SU-8 moulds coated on a Cee 200X.

Equipment: Cee 200X
Application: Bio, Microfluidics
Materials: Photoresist

Paper · 2020 · Micromachines (MDPI)

Highly Localized Enrichment of Trypanosoma brucei Parasites Using Dielectrophoresis

Titanium electrodes were patterned to concentrate trypanosome parasites by dielectrophoresis. A Cee spin coater with built-in hotplate applied and baked the LOR lift-off layer.

Equipment: Cee spin coater (model not given), Cee hotplate (model not given)
Application: Bio, Microfluidics
Materials: Photoresist

Patent · 2013 · Google Patents

Method for directed self-assembly

A directed self-assembly process using silicon hard mask and neutral layers. Solvent and developer resistance tests were run on a Cee 100CB coater and bake plate.

Equipment: Cee 100CB
Application: Lithography, Nanofabrication
Materials: Photoresist

Patent · 2005 · Google Patents

Perfluoropolyether benzotriazole derivatives and use thereof as coatings

Perfluoropolyether coatings with very low surface energy were applied to metal-coated silicon. Films were spun on a Cee 100 and baked on a Cee 1100 vacuum hotplate before contact angle tests.

Equipment: Cee 100
Application: Material Science
Substrate: Si

Patent · 2010 · Google Patents

Fabrication of High-Throughput Nano-Imprint Lithography Templates

Porous nanoimprint templates were planarised and capped with polymer layers for faster imprinting. Both the organic and silicon-containing layers were coated on a Cee 4000.

Equipment: Cee 4000
Application: Lithography, Nanofabrication
Materials: Photoresist

Patent · 2008 · Justia Patents

Deposition of permanent polymer structures for OLED fabrication

Permanent polymer structures with an undercut profile were made to pattern OLED layers. LOR10B and a positive resist were coated on Cee spinner equipment.

Equipment: Cee 100CB
Application: Lithography, Photonics
Materials: LOR10B, Photoresist

Patent · 2004 · Justia Patents

Method of making barrier layers

Barrier layers made by photodepositing metal oxides through a resist pattern. Photoresist was coated onto a 100 mm silicon wafer on Cee equipment.

Equipment: Cee spin coater (model not given)
Application: Material Science
Materials: Photoresist
Substrate: Si, 100 mm

Patent · 2019 · Google Patents

Polymerizable silane compound

A silane compound that polymerises into polysiloxane films is described. The films were prepared on a Cee 200X.

Equipment: Cee 200X
Application: Material Science

Procedure or protocol · LNF Wiki, University of Michigan Lurie Nanofabrication Facility

SU-8 lithography – LNF

A university cleanroom process page for SU-8, used for PDMS moulds and MEMS structures. It includes spin curves measured on an Apogee spin coater and processing advice.

Equipment: Apogee spin coater
Application: Lithography, Microfabrication
Materials: SU-8

Procedure or protocol · LNF Wiki, University of Michigan Lurie Nanofabrication Facility

AZ 12XT thick-resist process – LNF

A university cleanroom process page for AZ 12XT thick resist, from 10 to 25 µm. It gives a spin curve measured on a Cee 100 and the bake, exposure and develop steps.

Equipment: Cee 100
Application: Lithography
Materials: AZ12XT

Procedure or protocol · LNF Wiki, University of Michigan Lurie Nanofabrication Facility

LOR 10A lift-off process – LNF

A university cleanroom process page for LOR 10A, the underlayer in a bilayer lift-off stack. It gives an Apogee spin coater recipe, film measurements and bake, exposure and develop options.

Equipment: Apogee spin coater
Application: Lithography
Materials: Photoresist

Procedure or protocol · LNF Wiki, University of Michigan Lurie Nanofabrication Facility

PMGI SF 6 lift-off process – LNF

A university cleanroom process page for PMGI SF 6 lift-off. It gives Apogee spin conditions for a 350 nm underlayer and puddle develop steps on a Cee developer.

Equipment: Apogee spin coater, Cee developer (model not given)
Application: Lithography
Materials: Developer, Photoresist

Patent · 2014 · Justia Patents

Photosensitive compositions and applications thereof

Light-sensitive polymer formulations are described and tested for the exposure energy they need. One formulation was coated onto a 100 mm silicon wafer on a Cee 200CB with a two-stage spin.

Equipment: Cee 200CB
Application: Lithography
Materials: Photoresist
Substrate: Si, 100 mm

Paper · 2025 · MDPI

Induced Effects of Nano-Patterned Substrates on the Electrical and Photo-Electrical Properties of PTB7-Th:ICBA (1:1, wt.%) Bulk-Heterojunction Solar Cells

Organic solar cells were built on nanopatterned electrodes to see how the patterning changes their electrical and light response. The active layers were spun on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Material Science

Paper · 2024 · Microsystems & Nanoengineering (Springer Nature)

Ultra-sensitive nitrate-ion detection via transconductance-enhanced graphene ion-sensitive field-effect transistors

Graphene field-effect sensors were made to detect nitrate ions at very low levels. A nitrate-selective membrane was spun onto the sensors using a Cee-branded spinner.

Equipment: Cee spin coater (model not given)
Application: Bio Sensing Devices, Sensor

Paper · 2014 · Micromachines (MDPI)

Optimized Simulation and Validation of Particle Advection in Asymmetric Staggered Herringbone Type Micromixers

Herringbone micromixers were simulated and then built to check how well they mix particles. The multilayer SU-8 masters were made with successive coats on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Microfluidics
Materials: SU-8

Patent · 2010 · Google Patents

Rapid fabrication of a microelectronic temporary support for inorganic substrates

A quick way to give inorganic microelectronic substrates a temporary support layer. The liquid support material was applied on a Cee 100CB coater.

Equipment: Cee 100CB
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive

Paper · 2018 · Royal Society of Chemistry

Measurement of cytokine biomarkers using an aptamer-based affinity graphene nanosensor on a flexible substrate toward wearable applications

Flexible graphene transistor sensors were made to detect cytokine biomarkers using aptamers. A Cee 200X-F applied the LOR 3A and AZ 1512 resist layers on the flexible substrates.

Equipment: Cee 200X, Cee 200X-F
Application: Bio Sensing Devices, Flexible Electronics
Materials: AZ1512, Photoresist
Substrate: Flexible Polymer

Paper · 2011 · PLOS ONE

Cryopreservation of Spin-Dried Mammalian Cells

Mammalian cells protected with trehalose were spun dry before cryogenic storage. A Cee 200 served as the spin-drying apparatus.

Equipment: Cee 200
Application: Bio

Paper · 2014 · PubMed Central

A Raman Microspectroscopy Study of Water and Trehalose in Spin-Dried Cells

Raman microspectroscopy was used to measure water and trehalose in cells after spin drying. A Cee 200 was used to spin dry the cell monolayers.

Equipment: Cee 200
Application: Bio

Paper · 2008 · ScienceDirect

High resolution electron beam lithography of PMGI using solvent developers

Thin PMGI films were patterned by electron-beam lithography at high resolution using solvent developers. A 60 nm PMGI layer was spun onto silicon on a Cee spinner.

Equipment: Cee spin coater (model not given)
Application: Lithography, Nanofabrication
Materials: Photoresist
Substrate: Si

Paper · 2012 · Wiley Online Library

UV Illumination Room-Temperature ZnO Nanoparticle Ethanol Gas Sensors

Zinc oxide nanoparticle sensors were made to detect ethanol at room temperature under UV light. The ZnO suspension was spun onto alumina on a Cee 200.

Equipment: Cee 200
Application: Sensor

Patent · 2006 · Google Patents

Apparatus and method for recirculating alkane impregnation solution

Equipment for recirculating an alkane immersion fluid is described, with wafer tests to check compatibility with resists. A Cee 100CB coated and baked the resist and then spin cleaned the topcoat.

Equipment: Cee 100CB
Application: Lithography
Materials: Photoresist

Paper · 2016 · Royal Society of Chemistry

Hydrogen-peroxide-fuelled platinum–nickel–SU-8 microrocket with steerable propulsion using an eccentric nanoengine

Catalytic microrockets of platinum, nickel and SU-8 were made that run on hydrogen peroxide and can be steered. The SU-8 and polymer layers were spun on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Microfabrication
Materials: SU-8

Patent · 2006 · Justia Patents

Nanocomposite negative resists for next generation lithographies

Negative resists containing POSS nanoparticles are described for next-generation lithography. The films were spin cast onto three-inch silicon on a Cee wafer processing track.

Equipment: Cee spin coater (model not given)
Application: Lithography, Nanofabrication
Materials: Photoresist
Substrate: Si, 75 mm

Patent · 2005 · Google Patents

Permanent resist composition, cured product thereof, and use thereof

A thick permanent resist composition and its cured films are described. Samples were coated on 100 mm silicon on a Cee 100CB and baked on its hotplates before exposure.

Equipment: Cee 100CB
Application: Lithography
Materials: Photoresist
Substrate: Si, 100 mm

Patent · 2002 · Google Patents

Fluorinated polymers having ester groups and photoresists for microlithography

Fluorinated photoresist polymers containing ester groups are described for microlithography. Films were coated on silicon and calcium fluoride samples on a Cee 100CB.

Equipment: Cee 100CB
Application: Lithography
Materials: Photoresist
Substrate: Si

Patent · 2003 · Google Patents

Fluorinated copolymers for microlithographic printing

Fluorinated copolymers are described for microlithography, along with how much light they absorb. Films were coated on a Cee 100CB on silicon first, then on calcium fluoride.

Equipment: Cee 100CB
Application: Lithography
Materials: Photoresist
Substrate: Si

Paper · 2024 · Royal Society of Chemistry

Iodonium functionalized polystyrene as non-chemically amplified resists for electron beam and extreme ultraviolet lithography

Polystyrene resists carrying iodonium groups were tested for electron-beam and EUV lithography without chemical amplification. Thin films were made on a Cee 200X.

Equipment: Cee 200X
Application: Lithography, Nanofabrication
Materials: Photoresist, Polystyrene

Paper · 2023 · Research Square

A Wireless Battery-Free Disposable Electrical-Digital-PCR Chip

A wireless, battery-free chip for digital PCR with electrical readout. The resist and SU-8 microchamber steps were run on an X-Pro II workstation with integrated spin coating and baking.

Equipment: X-Pro II workstation
Application: Bio Sensing Devices, Microfluidics
Materials: Photoresist, SU-8

Paper · 2015 · Eindhoven University of Technology

Marangoni flows induced by atmospheric-pressure plasma jets

Atmospheric plasma jets were shown to drive surface flows in thin liquid films. Squalane films were spun onto polymer substrates on a Cee 200.

Equipment: Cee 200
Application: Material Science
Substrate: Flexible Polymer

Paper · Brookhaven National Laboratory / OSTI

Assembling Vertical Block Copolymer Nanopores via Solvent Vapor Annealing on Homopolymer-Functionalized Substrates

Vertical nanopores were formed in block copolymer films by solvent vapour annealing on brush-coated surfaces. The polymer brushes were grafted on an Apogee 300 bake plate under nitrogen.

Equipment: Apogee 300 bake plate
Application: Nanofabrication

Thesis · 2010 · OhioLINK Theses

Poly(dimethylsiloxane) Based Micro- and Nanofluidic Device Fabrication for Electrophoresis Applications

PDMS micro and nanofluidic devices were made for electrophoresis. A Cee 100CB coated the thin PDMS films on silicon and the SU-8 masters.

Equipment: Cee 100CB
Application: Microfluidics
Materials: PDMS, SU-8
Substrate: Si

Thesis · 2018 · Georgia Tech Theses

Processing, Characterization and Modeling of Solution-Processed Indium Tin Oxide Films

Indium tin oxide films were made from solution, then characterised and modelled electrically. The ITO films were coated onto glass on a Cee 100.

Equipment: Cee 100
Application: Material Science
Substrate: Glass

Thesis · 2003 · Georgia Tech Theses

Advanced Methods, Materials, and Devices for Microfluidics

Light-sensitive sacrificial polymers were developed to form channels in microfluidic devices. The polymer films were coated and baked on silicon on a Cee 100CB.

Equipment: Cee 100CB
Application: Microfluidics
Materials: Photoresist
Substrate: Si

Procedure or protocol · 2014 · Journal of Visualized Experiments

Ambient Method for the Production of an Ionically Gated Carbon Nanotube Common Cathode in Tandem Organic Solar Cells

A method for building tandem organic solar cells in air with a carbon nanotube cathode shared between both cells. A Cee spin coater was used in the fabrication.

Equipment: Cee spin coater (model not given)
Application: Material Science

Paper · 2013 · PubMed Central

Effect of Cross Sectional Geometry on PDMS Micro Peristaltic Pump Performance: Comparison of SU-8 Replica Molding vs. Micro Injection Molding

PDMS micro peristaltic pumps were built with different channel shapes to compare their performance. The thin PDMS base layer was spun onto a silanised glass wafer on a Cee 100.

Equipment: Cee 100
Application: Microfluidics
Materials: PDMS
Substrate: Glass

Procedure or protocol · 2011 · PubMed Central

Controlled confinement of DNA at the nanoscale: nanofabrication and surface bio-functionalization

A protocol for making metal nanopatterns on glass that confine DNA at the nanoscale. Resist was coated on a Cee 100 spinner.

Equipment: Cee 100
Application: Bio, Nanofabrication
Materials: Photoresist
Substrate: Glass

Thesis · 2011 · Georgia Tech Theses

Fundamental Understanding of Physicochemical Properties of Ultra-Thin Polymer Films

Ultra-thin model photoresist films were studied to understand how their properties change at small thickness. A Cee 100CB coated and baked the films on gold-coated silicon for infrared analysis.

Equipment: Cee 100CB
Application: Material Science
Materials: Photoresist
Substrate: Si

Procedure or protocol · 2026 · University of Southern California Protocol

Polyimide Shuttle Film Fabrication Protocol

A protocol for making polyimide shuttle films from five stacked layers. The final cure of the stack was done on an Apogee 300 bake plate.

Equipment: Apogee 300 bake plate
Application: Microfabrication
Materials: Polyimide

Patent · 2020 · Justia Patents

Composition and method for capture and degradation of PFAS

A composition for capturing and breaking down PFAS chemicals, tested in a microfluidic cell. The glass slides were primed with HMDS on a Cee spinner.

Equipment: Cee spin coater (model not given)
Application: Microfluidics
Materials: HMDS
Substrate: Glass

Thesis · 2025 · Cornell University Theses

Development of a Plant Membrane-on-Chip Platform for Interrogating Protein-Mediated Metal Transport

A plant membrane-on-chip platform was built to study how proteins carry copper across membranes. An Apogee spin coater applied the supporting PEDOT:PSS layer.

Equipment: Apogee spin coater
Application: Bio Sensing Devices
Materials: PEDOT:PSS

Paper · 2023 · PubMed Central

Matrix obstructions cause multiscale disruption in collective epithelial migration by suppressing leader cell function

Silicon masters with obstacles were made to study how blocked paths disrupt cells migrating as a sheet. SU-8 2050 was coated on a Cee 200X.

Equipment: Cee 200X
Application: Bio, Microfluidics
Materials: SU-8
Substrate: Si

Patent · 2016 · Justia Patents

Room temperature debondable and thermally curable compositions

Temporary bonding materials that cure with heat and release at room temperature, for through-silicon via processing. The material was coated onto via wafers on a Cee 100CB.

Equipment: Cee 100CB
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive
Substrate: Si

Paper · 2006 · Georgia Tech Research

Transient rheology of solvent-responsive complex fluids by integrating microrheology and microfluidics

A dialysis cell was built to follow how complex fluids change as the solvent around them changes. AZ 4620 resist was spun and soft baked on a Cee 100CB to pattern the cell.

Equipment: Cee 100CB
Application: Material Science, Microfluidics
Materials: AZ4620

Paper · 2021 · MDPI

Micrometer Sized Hexagonal Chromium Selenide Flakes for Cryogenic Temperature Sensors

Chromium selenide flakes were made into temperature sensors that work at cryogenic temperatures. A Cee spin coater applied the adhesion promoter for the contact lithography.

Equipment: Cee spin coater (model not given)
Application: Sensor
Substrate: Si

Paper · 2012 · ACS Publications

Rupture of Thin Liquid Films Induced by Impinging Air-Jets

How air jets rupture and dewet thin liquid films was studied experimentally. Triethylene glycol films were spun on a Cee 200.

Equipment: Cee 200
Application: Material Science

Patent · 2018 · Google Patents

Methods and apparatuses for predicting and using one or more resonance frequencies for efficient operation of an acoustofluidic cavity

A method for predicting resonance frequencies in acoustofluidic cavities used to move particles and cells. The test devices were patterned with resist from a Cee 100CB coat and bake system.

Equipment: Cee 100CB
Application: Microfluidics
Materials: Photoresist

Paper · 2010 · Brewer Science — iMAPS Device Packaging Conference

Novel Polymeric Protective Coatings for Hydrofluoric Acid Vapor Etching During MEMS Release Etch

New polymer coatings were developed to protect MEMS during HF vapour release etching. The protective films were applied and baked on a Cee 100CB.

Equipment: Cee 100CB
Application: Microfabrication

Patent · 2007 · Google Patents

Y-branch thermo-optic digital optical switch and variable optical attenuator using non-uniform heating

A polymer waveguide optical switch and attenuator that uses uneven heating. The cladding layers were coated on a Cee 100.

Equipment: Cee 100
Application: Photonics

Paper · 2023 · PulseForge and Brewer Science, CS MANTECH

Photonic Debonding for Wafer-Level Packaging

Photonic debonding uses flash lamp light to release thin wafers from glass carriers for wafer-level packaging. After release, a Cee spin coater with pressure-pot dispense cleaned the wafers.

Equipment: Cee spin coater (model not given)
Application: Advanced Packaging, Temporary Bonding & Debonding

Thesis · Georgia Tech Theses

High Density and High Reliability Thin Film Embedded Capacitors on Organic and Silicon Substrates

Thin-film capacitors were embedded in organic and silicon substrates for high density and reliability. A 30 µm coating step was carried out on a Cee 100CB.

Equipment: Cee 100CB
Application: Advanced Packaging
Substrate: Si

Thesis · 2012 · University of Texas at Austin Thesis

Solvent Annealing and Thickness Control for the Orientation of Silicon-containing Block Copolymers for Nanolithographic Applications

Silicon-containing block copolymer films were studied to control their orientation for nanolithography using solvent annealing and film thickness. The films were made on a Cee 100CB.

Equipment: Cee 100CB
Application: Lithography, Nanofabrication
Materials: Silicon-containing block copolymers

Paper · 2011 · IIUM Engineering Journal

Observation on Responsive OCV Variation of Zinc-Air Cell with Relative Humidity Content

A zinc-air microcell coated with an MCM-41 membrane was tested as a humidity sensor. The membrane was spun onto the zinc on a Cee 200X.

Equipment: Cee 200X
Application: Sensor

Paper · 2010 · ACS Publications

NEXAFS Depth Profiling of Surface Segregation in Block Copolymer Thin Films

Depth profiling was used to show how one block of a copolymer gathers at the film surface. The films were coated at 2000 rpm on a Cee 100CB.

Equipment: Cee 100CB
Application: Material Science

Thesis · 2011 · Auburn University Theses

A Novel Through-Silicon-Via (TSV) Fabrication Method

A new method for making copper through-silicon vias. The resist steps used a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Advanced Packaging
Materials: Photoresist

Thesis · 2010 · OhioLINK Theses

Ambipolar Ballistic Electron Emission Microscopy Studies of Gate-field Modified Schottky Barriers

Back-gated Schottky contacts were made to study how a gate field changes the barrier, using ballistic electron emission microscopy. A Cee 100CB coated and baked the bilayer lift-off resist.

Equipment: Cee 100CB
Application: Microfabrication
Materials: Photoresist

Paper · 2006 · Langmuir (American Chemical Society)

Anti-Biofouling Properties of Comblike Block Copolymers with Amphiphilic Side Chains

Comb-shaped block copolymers were tested as coatings that stop marine organisms sticking. Test samples were spun onto silicon on a Cee 100CB.

Equipment: Cee 100CB
Application: Bio, Material Science
Substrate: Si

Patent · 2013 · Google Patents

Fluorinated silane coating compositions for thin wafer bonding and handling

Fluorinated silane coatings are described as release surfaces for bonding and handling thin wafers. The solutions were coated on 100 mm silicon and baked on a Cee 100CB.

Equipment: Cee 100CB
Application: Advanced Packaging, Temporary Bonding & Debonding
Substrate: Si, 100 mm

Procedure or protocol · 2025 · California DREAMS

California DREAMS Cleanroom Gateway Handbook

A training handbook for a cleanroom outreach programme, with a sample traveller for making patterned silicon windows. An Apogee bake plate handles the dehydration and HMDS prime bakes.

Equipment: Apogee bake plate
Application: Lithography
Materials: HMDS
Substrate: Si

Paper · 2018 · Royal Society of Chemistry

Splitting and separation of colloidal streams in sinusoidal microchannels

Sinusoidal microchannels were shown to split and separate streams of colloidal particles. SU-8 moulds for the chips were coated on a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2016 · PubMed Central

An Embedded Microretroreflector-Based Microfluidic Immunoassay Platform

Tiny retroreflectors were built into a microfluidic chip to give optical readout of immunoassays. The SU-8 reflector structures were coated on a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication, Microfluidics
Materials: SU-8

Patent · 2018 · Brewer Science — Published Patent Examples

Cyclic olefin polymer compositions and polysiloxane release layers for use in temporary wafer bonding processes

Cyclic olefin adhesives and polysiloxane release layers are described for temporary wafer bonding. After debonding, adhesive residue was cleaned off on a Cee 200FX.

Equipment: Cee 200FX
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Cyclic olefin polymer

Paper · 2010 · Brewer Science, Journal of Microelectronics and Electronic Packaging

ZoneBOND Thin Wafer Support Process for Wafer Bonding Applications

A thin wafer support process for temporary bonding, with release from the carrier at room temperature. After release, the wafers were solvent cleaned and rinsed on a Cee 200FX.

Equipment: Cee 200FX
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive

Paper · 2026 · PubMed Central

Snapshot Redox Cycling Voltammetry (Snapshot RCV): Fast Generation-Collection Detection across a Wide Potential Range at a Chip-Based Microelectrode Array

A fast voltammetry method using redox cycling on chip-based microelectrode arrays. The resist patterning for the arrays used a Cee 200CBX.

Equipment: Cee 200CBX
Application: Microfabrication, Sensor
Materials: Photoresist

Thesis · 2020 · UNC Charlotte Doctoral Thesis

Development of an Adaptive X-ray Research Facility and a Direct Bonded Silicon Reference Object for Computed Tomography

An X-ray research facility was built, along with a bonded silicon reference object for CT. Resist coating and baking for the reference object used a Cee 200 and a Cee 1100FX hotplate.

Equipment: Cee 1100FX, Cee 200
Application: Microfabrication, Sensor
Materials: Photoresist
Substrate: Si

Thesis · 2021 · Politecnico di Torino Doctoral Thesis

Novel crystallization platforms for drugs and biomolecules: self-assembled surface functionalization and gels

New surfaces for crystallising drugs and biomolecules were studied, including aspirin crystals formed by spinning. An Apogee spin coater was used in the crystallisation work.

Equipment: Apogee spin coater
Application: Material Science, Microfabrication

Paper · 2019 · CTI Renato Archer, Government of Brazil

Desenvolvimento de processos de microfabricação com resiste espesso SU-8 e de selagem de dispositivo

A research report on thick SU-8 lithography and sealing for piezoelectric microfluidic devices. The thick resist processing used a Cee 200CBX.

Equipment: Cee 200CBX
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2013 · TriQuint and Brewer Science, CS MANTECH

Meeting the Fabrication Challenges for Backside Processing on Thin Substrates with Ultrahigh Device Topography

A conference paper on backside processing of thin device wafers with tall surface features. A Cee 1300CSX slide debonder with heated chucks at 190°C separated the thinned wafers from their carriers.

Equipment: Cee 1300CSX
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive

Paper · 2014 · NCAP and Chinese Academy of Sciences, ICEPT

Investigation of temporary bonding and release processes for TSV with copper pillar bumps

Temporary bonding and release were studied for through-silicon via wafers carrying copper pillar bumps. The 200 mm wafers were thermally slide debonded at 190°C on a Cee 1300DB.

Equipment: Cee 1300DB
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive
Substrate: Si, 200 mm

Facility page · 2026 · Kayaku Advanced Materials

Design Fabrication Services: Semiconductor & Wafer Processing Capabilities

A company fabrication services page listing in-house wafer bonding and debonding for advanced packaging. Apogee bonding and debonding tools handle wafers up to 200 mm.

Equipment: Apogee bonder
Application: Advanced Packaging, Temporary Bonding & Debonding

Facility page · Naval Postgraduate School Center for Materials Research

Cleanroom – Center for Materials Research – Naval Postgraduate School

A university MEMS cleanroom listing its lithography tools. Coating runs on a Cee 200X and development on an Apogee spin developer.

Equipment: Cee 200X
Application: Lithography, Microfabrication
Materials: Photoresist

Facility page · University at Albany CNSE Innovation Lab

CNSE Innovation Lab | University at Albany

A university innovation lab listing its tools for spin-on films. An Apogee spin coat and bake system handles the coating and baking.

Equipment: Apogee spin coater, Cee spin coater (model not given)
Application: Lithography, Microfabrication
Materials: Photoresist

Paper · 2023 · Royal Society of Chemistry

Conjugated polymer blends for faster organic mixed conductors

Blends of conjugated polymers were shown to give faster organic mixed conductors. The polymer films were coated on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Material Science, Microfabrication
Materials: Conjugated polymer

Paper · 2018 · Royal Society of Chemistry

Continuous monitoring of adenosine and its metabolites using microdialysis coupled to microchip electrophoresis with amperometric detection

A microchip coupled to microdialysis was built to monitor adenosine and its breakdown products continuously. The SU-8 steps for the chip used a Cee 100.

Equipment: Cee 100
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2018 · Royal Society of Chemistry

Polymer-metal coating for high contrast SEM cross sections at the deep nanoscale

A polymer and metal coating was developed to give high contrast in SEM cross sections of nanoscale structures. The polymer film was applied on a Cee 100FX.

Equipment: Cee 100FX
Application: Material Science, Microfabrication

Paper · 2021 · Royal Society of Chemistry

Design and construction of three-dimensional physiologically-based vascular branching networks for respiratory assist devices

Branching vascular networks modelled on real physiology were built into a respiratory assist device. The PDMS membranes were prepared on Cee spin coaters.

Equipment: Cee 100
Application: Microfabrication, Microfluidics
Materials: PDMS

Paper · 2014 · Royal Society of Chemistry

Microfluidic liquid jet system with compatibility for atmospheric and high-vacuum conditions

A microfluidic liquid jet system was built that works both in air and in high vacuum. The SU-8 masters were made on a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication, Microfluidics
Materials: SU-8

Patent · 2011 · Brewer Science — Published Patent Examples

Methods of producing structures using a developer-soluble layer with multilayer technology

A multilayer patterning method using a layer that dissolves in developer. A Cee 200CB coated and baked the layers, and a Cee 200FX developer with a megasonic transducer developed them.

Equipment: Cee 200CB, Cee 200FX
Application: Microfabrication
Materials: Developer, Photoresist

Paper · 2018 · ScienceDirect

On the properties of organic heterostructures prepared with nano-patterned metallic electrode

Organic heterostructures were built on metal electrodes patterned by nanoimprint. A Cee 200X was used in preparing the patterned electrodes.

Equipment: Cee 200X
Application: Material Science, Microfabrication

Paper · 2017 · ScienceDirect

Difference in growth and coalescing patterns of droplets on bi-philic surfaces with varying spatial distribution

Droplet growth and merging were compared on surfaces with water-loving and water-repelling patches in different layouts. The resist patterns defining the patches were coated on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Material Science, Microfabrication
Materials: Photoresist

Paper · 2013 · ScienceDirect

One-way wicking in open micro-channels controlled by channel topography

Open microchannels were shaped so that liquid wicks along them in one direction only. The SU-8 channels were made on a Cee 100CB.

Equipment: Cee 100CB
Application: Microfabrication, Microfluidics
Materials: SU-8
Substrate: 75 mm

Paper · 2017 · Royal Society of Chemistry

Top-down fabrication of fluorine-doped tin oxide nanopillar substrates for solar water splitting

Fluorine-doped tin oxide was etched into nanopillars to make electrodes for solar water splitting. A Cee 200X coated the nanosphere masks used to pattern the pillars.

Equipment: Cee 200X
Application: Material Science, Microfabrication
Materials: Polystyrene

Paper · 2026 · PubMed Central

High Numerical Aperture Metalens for the Deep Ultraviolet

A metalens with high numerical aperture was made for deep ultraviolet light. The negative resist for the lens patterning was coated on a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication, Photonics
Materials: Photoresist

Paper · 2020 · Nature Communications (Springer Nature)

Surface enhanced Raman scattering artificial nose for high dimensionality fingerprinting

An artificial nose based on surface-enhanced Raman scattering that fingerprints many compounds at once. An Apogee spin coater laid down the polystyrene monolayers for the sensing substrates.

Equipment: Apogee spin coater, Cee spin coater (model not given)
Application: Microfabrication, Sensor
Materials: Polystyrene

Paper · 2017 · PubMed Central

Physical disruption of cell–cell contact induces VEGF expression in RPE cells

Cell experiments showed that breaking contact between retinal cells raises VEGF expression. A Cee 200X was used to make the PDMS patterns.

Equipment: Cee 200X
Application: Bio, Microfabrication
Materials: PDMS

Paper · 2018 · PubMed Central

Non-toxic engineered carbon nanodiamond concentrations induce oxidative/nitrosative stress, imbalance of energy metabolism, and mitochondrial dysfunction in microglial and alveolar basal epithelial cells

Nanodiamonds at non-toxic levels were found to cause oxidative and nitrosative stress in cells, measured by microchip electrophoresis. A Cee 100 was used in making the microchips.

Equipment: Cee 100
Application: Bio, Microfabrication

Paper · 2014 · PubMed Central

Microchip Electrophoresis with Amperometric Detection Method for Profiling Cellular Nitrosative Stress Markers

A microchip electrophoresis method with amperometric detection was developed to profile nitrosative stress in cells. A Cee 100 was used in making the chips.

Equipment: Cee 100
Application: Microfabrication, Microfluidics

Paper · 2011 · PubMed Central

In-channel amperometric detection for microchip electrophoresis using a wireless isolated potentiostat

Amperometric detection inside the separation channel of an electrophoresis microchip, run by a wireless isolated potentiostat. A Cee 100 was used in fabricating the chips.

Equipment: Cee 100
Application: Microfabrication, Microfluidics

Paper · 2015 · PubMed Central

Evaluation of in-channel amperometric detection using a dual-channel microchip electrophoresis device and a two-electrode potentiostat for reverse polarity separations

A dual-channel electrophoresis microchip was used to test amperometric detection inside the channel under reversed polarity. The SU-8 moulds were coated on a Cee 100.

Equipment: Cee 100
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2015 · PubMed Central

Microchip electrophoresis with electrochemical detection for the determination of analytes in the dopamine metabolic pathway

Microchip electrophoresis with electrochemical detection was used to measure compounds in the dopamine pathway. SU-8 for the chip masters was coated on a Cee 100.

Equipment: Cee 100
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2023 · PubMed Central

Impact of crowding on the diversity of expanding populations

How crowding affects genetic diversity as cell populations expand was studied in microfabricated chambers. The SU-8 master moulds were coated on a Cee 100.

Equipment: Cee 100
Application: Bio, Microfabrication
Materials: SU-8

Paper · 2006 · PubMed Central

Self-assembled single-crystal silicon circuits on plastic

Single-crystal silicon circuits were self-assembled onto plastic. SU-8 layers in the process were coated on a Cee 100.

Equipment: Cee 100
Application: Material Science, Microfabrication
Materials: SU-8
Substrate: Flexible Polymer

Paper · 2022 · PubMed Central

Separation and Detection of Tyrosine and Phenylalanine-derived Oxidative Stress Biomarkers Using Microchip Electrophoresis with Electrochemical Detection

Oxidative stress biomarkers derived from tyrosine and phenylalanine were separated and detected on a microchip. A Cee 100 handled the resist processing for the chips.

Equipment: Cee 100
Application: Microfluidics, Sensor
Materials: SU-8

Paper · 2012 · PubMed Central

Performance and scaling effects in a multilayer microfluidic extracorporeal lung oxygenation device

A multilayer microfluidic artificial lung was tested for performance as it scales up. The PDMS gas transfer membranes were spun on a Cee 100.

Equipment: Cee 100
Application: Microfabrication, Microfluidics
Materials: PDMS

Patent · 2025 · Justia Patents

Minimal invasive electrocorticographic brain-computer interface

A minimally invasive brain-computer interface that records from the surface of the brain. An Apogee bake plate prebaked the photoresist during fabrication.

Equipment: Apogee bake plate
Application: Lithography, Microfabrication
Materials: Photoresist

Patent · 2026 · Google Patents

Ultralow-ri materials, low-k dielectric materials, composites, and methods

Dielectric materials with very low refractive index and low k are described. The films were coated onto reclaimed silicon wafers on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Material Science, Microfabrication
Substrate: Si

Paper · 2025 · ACS Publications

Microelectrode Arrays for Electrochemical Cycling of Individual Battery Particles

Microelectrode arrays were made to charge and discharge single battery particles. An Apogee spin coater applied the LOR and S1813 resists.

Equipment: Apogee spin coater
Application: Microfabrication, Sensor
Materials: S1813

Paper · Stanford Nano Shared Facilities

Developing Planarization Technique for SiNx

A student project developing a planarisation method for silicon nitride. HSQ was coated on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Lithography, Microfabrication
Materials: HSQ

Paper · 2024 · PubMed Central

Design, Fabrication, and Dynamic Analysis of a MEMS Ring Resonator Supported by Twin Circular Curve Beams

A MEMS ring resonator was designed, made in SOI and analysed dynamically. S1811 resist was coated on a Cee 200X and soft baked under vacuum on a Cee 1300X.

Equipment: Cee 1300X, Cee 200X
Application: Lithography, Microfabrication
Materials: Photoresist
Substrate: SOI

Facility page · 2018 · NIST Center for Nanoscale Science and Technology

NanoFab Tool: CEE Apogee Spinner | NIST

A national laboratory nanofabrication tool page for its Apogee spin coater, used for photoresist coating.

Equipment: Apogee spin coater
Application: Lithography, Microfabrication
Materials: Photoresist

Paper · 2024 · npj Biosensing

Rapid on-site amplification and visual detection of misfolded proteins via microfluidic quaking-induced conversion (Micro-QuIC)

A microfluidic test that amplifies misfolded proteins on site and shows the result visually. The SU-8 master moulds were made on a Cee 100.

Equipment: Cee 100
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2021 · PubMed Central

Nucleobases thin films deposited on nanostructured transparent conductive electrodes for optoelectronic applications

Thin films of nucleobases were deposited on nanostructured transparent electrodes for optoelectronics. A Cee 200X applied the photoresist for the electrode nanostructures.

Equipment: Cee 200X
Application: Microfabrication, Photonics
Materials: Photoresist

Procedure or protocol · ScienceDirect

Microfabricated Environments to Study Collective Cell Behaviors

A methods chapter on building microfabricated environments to study how groups of cells behave. The fabrication used a Cee 200X.

Equipment: Cee 200X
Application: Bio, Microfabrication

Paper · 2021 · ACS Publications

Impact of Poly(dimethylsiloxane) Surface Modification with Conventional and Amino Acid-Conjugated Self-Assembled Monolayers on the Differentiation of Induced Pluripotent Stem Cells into Cardiomyocytes

PDMS surfaces were modified with amino acid monolayers to steer stem cells into heart muscle cells. The PDMS substrates were prepared on a Cee 200X.

Equipment: Cee 200X
Application: Bio, Microfabrication
Materials: PDMS

Paper · 2013 · ScienceDirect

Sensitive SERS-pH sensing in biological media using metal carbonyl functionalized planar substrates

Planar SERS substrates with metal carbonyl groups were made to sense pH in biological fluids. The polystyrene particles were coated on a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication, Sensor
Materials: Polystyrene

Paper · 2020 · ScienceDirect

A facile surface modification of poly(dimethylsiloxane) with amino acid conjugated self-assembled monolayers for enhanced osteoblast cell behavior

A simple way to modify PDMS with amino acid monolayers, tested with bone-forming cells. The PDMS films were prepared on a Cee 200X.

Equipment: Cee 200X
Application: Bio, Microfabrication
Materials: PDMS

Facility page · University of Waterloo QNFCF

Spin Coat: E-Beam resist station [BREWER-Ebeamspinbake] | Quantum-Nano Fabrication and Characterization Facility | University of Waterloo

A university cleanroom tool page for its electron-beam resist station, which pairs a Cee 200X spin coater with a Cee 1300X bake plate.

Equipment: Cee 1300X, Cee 200X
Application: Lithography, Microfabrication
Materials: Photoresist

Facility page · University of Waterloo QNFCF

Spin coat: UV resist station [BREWER-UVspinbake] | Quantum-Nano Fabrication and Characterization Facility | University of Waterloo

A university cleanroom tool page for its UV resist station, which pairs a Cee 200X spin coater with a Cee 1300X bake plate.

Equipment: Cee 1300X, Cee 200X
Application: Lithography, Microfabrication
Materials: Photoresist

Thesis · University of Michigan Deep Blue

Miniaturized Fabry-Perot Polymer Film Ultrasound Sensor for Photoacoustic Endoscope System

A miniature Fabry-Perot polymer film ultrasound sensor was developed for a photoacoustic endoscope. The photoresist steps used a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication, Photonics
Materials: Photoresist

Facility page · National University of Singapore Research Facilities

Spin Coater – Research Facilities

A university research facility page for its Cee 200X, used to coat photoresists and other thin films.

Equipment: Cee 200X
Application: Lithography, Microfabrication
Materials: Photoresist

Paper · 2026 · PubMed Central

System-level transient simulation of bioresorbable and flexible electronic circuits

Simulation of bioresorbable flexible circuits as they dissolve, with physical circuits built to match. AZ 12XT resist was coated on a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication
Materials: AZ12XT

Facility page · AMOLF NanoLab

CEE Apogee 200 Spin coater – AMOLF

A research institute tool page for its Apogee 200 spin coater, used for resists including HSQ, PMMA and SU-8.

Equipment: Apogee spin coater
Application: Lithography, Microfabrication
Materials: HSQ, PMMA, SU-8

Facility page · 2019 · University of Queensland

CEE Apogee Coater and Hot Plate – Centre for Microscopy and Microanalysis – University of Queensland

A university microscopy and microanalysis centre page for its Apogee coater and hotplate, used to prepare photoresist layers.

Equipment: Apogee spin coater, Cee hotplate (model not given)
Application: Lithography, Microfabrication
Materials: Photoresist

Procedure or protocol · University of Minnesota Nano Center

Keller Spinner CEE-3 (Apogee) SOP – Minnesota

A university nanocentre operating procedure for an Apogee spin coater, covering how to coat photoresist evenly.

Equipment: Apogee spin coater
Application: Lithography, Microfabrication
Materials: Photoresist

Facility page · HKUST Nanosystem Fabrication Facility

Photolithography Module | Dr Tai-chin Lo Nanosystem Fabrication Facility, HKUST

A university nanofabrication facility page for its lithography module. A Cee coater applies resist and removes the edge bead.

Equipment: Cee spin coater (model not given)
Application: Lithography, Microfabrication
Materials: Photoresist

Facility page · RIT Semiconductor Nanofabrication Laboratory

CEE Resist Developer – Semiconductor Nanofabrication Laboratory – Confluence

Archived operating instructions from a university nanofabrication lab for its Cee resist developer, which uses CD-26.

Equipment: Cee developer (model not given), Cee spin coater (model not given)
Application: Lithography, Microfabrication
Materials: CD-26 developer

Facility page · Center for Integrated Nanotechnologies, Los Alamos and Sandia

Integration Labs Lithography

A national laboratory user facility page for its lithography tools, including a Cee 1000 hotplate.

Equipment: Cee 1000
Application: Lithography, Microfabrication

Facility page · Carnegie Mellon Bertucci Nanotechnology Laboratory

CEE 100CB Bench Mounted Spinner/Hotplate – Claire & John Bertucci Nanotechnology Laboratory – College of Engineering – Carnegie Mellon University

A university nanotechnology lab page for its bench-mounted Cee 100CB spinner and hotplate, used for positive resist coating and vacuum baking.

Equipment: Cee 100CB
Application: Lithography, Microfabrication
Materials: Photoresist

Procedure or protocol · University of Texas at Dallas Research Core Facilities

Photomask Making – Research Core Facilities

A university core facility procedure for making photomasks. A Cee spinner and hotplate coat and prebake the photoresist.

Equipment: Cee spin coater (model not given), Cee hotplate (model not given)
Application: Lithography, Microfabrication
Materials: Photoresist

Procedure or protocol · University of Florida Nanoscale Research Facility

NRF Lithography Processes SOP – University of Florida

A university research facility lithography procedure that uses a Cee hotplate for its resist bakes.

Equipment: Cee hotplate (model not given), Cee spin coater (model not given)
Application: Lithography, Microfabrication
Materials: Photoresist

Procedure or protocol · University of Alabama in Huntsville

CEE Spinner/Hotplate Operation – UAH

A university operating procedure for a Cee 100CB spinner and hotplate, covering coating and baking.

Equipment: Cee 100CB
Application: Lithography, Microfabrication
Materials: Photoresist

Facility page · 2016 · UNC Charlotte Center for Optoelectronics and Optical Communications

Brewer Science Spin Processor – Center for Optoelectronics and Optical Communications

A university optoelectronics centre page for its Cee 200 spin processor, used for resist coating, edge bead removal and backside rinse.

Equipment: Cee 200
Application: Lithography, Microfabrication
Materials: Photoresist

Paper · 2017 · Scientific Reports (Springer Nature)

Detection of red blood cell surface antigens by probe-triggered cell collision and flow retardation in an autonomous microfluidic system

A microfluidic test that detects blood group antigens on red cells from how they collide and slow in a channel. The SU-8 structures were made on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2022 · PubMed Central

Geometry-Dependent Efficiency of Dean-Flow Affected Lateral Particle Focusing and Separation in Periodically Inhomogeneous Microfluidic Channels

How channel shape affects Dean-flow particle focusing and separation was studied in curved microchannels. The SU-8 master moulds were coated on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Microfabrication, Microfluidics
Materials: SU-8

Patent · 2023 · Google Patents

Composition containing nonlinear optically active copolymer

Nonlinear optical copolymer compositions are described. The films were coated on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Material Science, Microfabrication
Materials: Nonlinear optical copolymer

Paper · 2025 · PubMed Central

Nanoindentation Analysis of SU-8 Coated Wafers at Different Baking Phases

Nanoindentation was used to compare SU-8 coated wafers at different stages of baking. The SU-8 was coated on a Cee 200CBX and baked on a Cee 1300X.

Equipment: Cee 1300X, Cee 200CBX
Application: Material Science, Microfabrication
Materials: SU-8

Paper · 2025 · PubMed Central

Tuning Wetting Properties Through Surface Geometry in the Cassie–Baxter State

Silicon micropost arrays were used to show how surface geometry controls wetting in the Cassie-Baxter state. The photoresist was coated on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Material Science, Microfabrication
Materials: Photoresist
Substrate: Si

Facility page · University of Delaware Nanofabrication Facility

Capabilities – University of Delaware Nanofabrication Facility

A university nanofabrication facility page for its Cee 200CBX, used to coat and bake electron-beam resists, photoresists and SU-8.

Equipment: Cee 200CBX
Application: Lithography, Microfabrication
Materials: SU-8

Paper · 2016 · Wiley Online Library

Material-Driven Fibronectin Assembly Promotes Maintenance of Mesenchymal Stem Cell Phenotypes

Polymer films that make fibronectin assemble into networks were shown to help stem cells keep their characteristics. The polymer films were spun on Cee equipment.

Equipment: Cee spin coater (model not given)
Application: Bio, Microfabrication

Paper · 2009 · Wiley Online Library

Plasma Processes Combined with Colloidal Lithography to Produce Nanostructured Surfaces for Cell-Adhesion

Plasma treatment and colloidal lithography were combined to make nanostructured surfaces for cell adhesion studies. The polystyrene colloids were assembled on a Cee 200.

Equipment: Cee 200
Application: Bio, Microfabrication
Materials: Polystyrene

Paper · 2008 · PubMed Central

Interactions Between Multiple Cell Types in Parallel Microfluidic Channels: Monitoring Platelet Adhesion to an Endothelium in the Presence of an Anti-Adhesion Drug

Parallel microfluidic channels were used to watch platelets interact with other cell types. The SU-8 masters were made on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Bio, Microfabrication
Materials: SU-8

Paper · 2022 · PubMed Central

Effect of Aluminum Nanostructured Electrode on the Properties of Bulk Heterojunction Based Heterostructures for Electronics

Nanostructured aluminium electrodes were tested in bulk heterojunction organic devices. A Cee 200X was used in preparing the nanoimprinted electrodes.

Equipment: Cee 200X
Application: Material Science, Microfabrication

Procedure or protocol · 2022 · PubMed Central

Preparation and Use of Wireless Reprogrammable Multilateral Optogenetic Devices for Behavioral Neuroscience

A protocol for making wireless, reprogrammable optogenetic implants for behaviour studies. The spin coating used a Cee 200X.

Equipment: Cee 200X
Application: Bio, Microfabrication

Procedure or protocol · 2017 · PubMed Central

Photolithography-Based Substrate Microfabrication for Patterning Semaphorin 3A to Study Neuronal Development

A protocol for patterning semaphorin 3A on substrates to study how neurons develop. The master moulds were made on a Cee 200CB.

Equipment: Cee 200CB
Application: Bio, Microfabrication
Materials: SU-8

Paper · 2015 · Nature Communications (Springer Nature)

Plasticity and ductility in graphene oxide through a mechanochemically induced damage tolerance mechanism

Graphene oxide was shown to become ductile through a mechanochemical damage tolerance mechanism. Photoresist for the test specimens was coated on a Cee 200X.

Equipment: Cee 200X
Application: Lithography, Microfabrication
Materials: Photoresist

Paper · 2025 · ACS Publications

Sampling Probes Microfabricated from Parylene-C for In Vivo Neurochemical Monitoring

Parylene-C sampling probes were microfabricated to monitor brain chemistry in living animals. Thick resist was coated on a Cee 200X.

Equipment: Cee 200X
Application: Microfabrication, Sensor
Materials: Photoresist

Paper · 2019 · Micromachines (MDPI)

A Compact, Syringe-Assisted, Vacuum-Driven Micropumping Device

A compact micropump driven by vacuum from a syringe. The SU-8 master moulds were coated on a Cee 200.

Equipment: Cee 200
Application: Microfabrication, Microfluidics
Materials: SU-8

Paper · 2024 · Photonics (MDPI)

Super-Oscillating Diffractive Optical Spot Generators

Diffractive optical elements were made that focus light to spots smaller than the usual limit. S1805 resist was coated on aluminium-coated 100 mm fused silica on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Lithography, Microfabrication, Photonics
Materials: S1805
Substrate: Glass, 100 mm

Paper · 2020 · ACS Publications

Development of a Biocompatible Solid Phase Microextraction Thin Film Coating for the Sampling and Enrichment of Peptides

A biocompatible solid-phase microextraction film was developed to sample and concentrate peptides. The film was coated on a Cee 200.

Equipment: Cee 200
Application: Microfabrication, Sensor

Paper · 2018 · Coatings (MDPI)

Pulsed Laser Deposition of Indium Tin Oxide Thin Films on Nanopatterned Glass Substrates

Indium tin oxide was grown by pulsed laser deposition on nanopatterned glass. A Cee 200X applied the primer while the glass was being patterned.

Equipment: Cee 200X
Application: Microfabrication, Photonics
Substrate: Glass

Paper · 2023 · ACS Publications

A Single-Component Molecular Glass Resist Based on Tetraphenylsilane Derivatives for Electron Beam Lithography

A single-component molecular glass resist based on tetraphenylsilane was developed for electron-beam lithography. The resist films were prepared on a Cee 200X.

Equipment: Cee 200X
Application: Lithography, Microfabrication
Materials: Photoresist

Paper · 2021 · Micromachines (MDPI)

An Integrated Centrifugal Degassed PDMS-Based Microfluidic Device for Serial Dilution

A PDMS microfluidic device that makes serial dilutions using centrifugal force and degassed PDMS. SU-8 2050 for the two-level moulds was coated onto three-inch silicon on a Cee 200.

Equipment: Cee 200
Application: Microfabrication, Microfluidics
Materials: SU-8
Substrate: Si, 75 mm

Paper · 2025 · Royal Society of Chemistry

Memristive behaviour of PANI/Au hybrid nanocomposites synthesized via various routes

Polyaniline and gold nanocomposites made by different routes were compared as memristive materials. The films were prepared on a Cee 100.

Equipment: Cee 100
Application: Material Science, Microfabrication
Materials: PANI/Au nanocomposite

Paper · 2021 · PubMed Central

Nanoscale Piezoelectric Properties and Phase Separation in Pure and La-Doped BiFeO3 Films Prepared by Sol–Gel Method

Pure and lanthanum-doped bismuth ferrite films were made by sol-gel to study their piezoelectric behaviour at the nanoscale. The sol-gel films were spun on a Cee 200X.

Equipment: Cee 200X
Application: Material Science, Microfabrication
Materials: Bismuth ferrite (BiFeO3)

Paper · 2010 · ScienceDirect

Investigation of optical properties of benzocyclobutene wafer bonding layer used for 3D interconnects via infrared spectroscopic ellipsometry

The optical properties of BCB used as a bonding layer for 3D interconnects were measured by infrared ellipsometry. The BCB films were coated on a Cee 200FX.

Equipment: Cee 200FX
Application: Advanced Packaging, Material Science
Materials: Benzocyclobutene (BCB)

Facility page · University of Arkansas Nano & Bio Materials Characterization Facility

Equipment – Arkansas Nano & Bio Materials Characterization Facility

A university materials characterisation facility page listing a Cee 100 for coating even photoresist films.

Equipment: Cee 100
Application: Lithography, Microfabrication
Materials: Photoresist

Procedure or protocol · MIT Fabtools

PMMA spinner standard operating procedure – MIT

A university operating procedure for a Cee 100 spinner used for PMMA and other electron-beam resists, covering programs, dispense and spinning.

Equipment: Cee 100
Application: Lithography, Microfabrication
Materials: PMMA

Paper · 2012 · PubMed Central

Micro-Ring Structures Stabilize Microdroplets to Enable Long Term Spheroid Culture in 384 Hanging Drop Array Plates

Micro-ring structures were added to 384-well hanging drop plates to keep droplets stable for long-term spheroid culture. A Cee 200X was used as a centrifuge to test how well the drops stayed in place.

Equipment: Cee 200X
Application: Bio

Paper · 2015 · PubMed Central

Polyethylene Glycol Coatings on Plastic Substrates for Chemically Defined Stem Cell Culture

PEG coatings on plastic were developed for growing stem cells in fully defined conditions. The polymer coatings were applied on a Cee 100.

Equipment: Cee 100
Application: Bio, Microfabrication
Materials: Polyethylene glycol (PEG)

Facility page · LSU New Orleans AMRI

Spin Coater – LSU New Orleans AMRI

A university research institute page for its Cee 200CB coater and hotplate, used to coat and bake photoresist for thin-film patterning.

Equipment: Cee 200CB
Application: Lithography, Microfabrication
Materials: Photoresist

Paper · 2019 · University of Notre Dame NDnano

Biomimetic membranes: Thomas Kasl NDnano project summary

A university project summary on biomimetic membranes, built around an automated coating set-up using an Apogee spin coater.

Equipment: Apogee spin coater
Application: Microfabrication

Paper · 2025 · PubMed Central

A Microfabrication Technique for High-Performance Diffractive Optical Elements Tailored for Numerical Simulation

A microfabrication method for high-performance diffractive optical elements with a given numerical aperture. The layer that forms the optical surface was coated on a Cee 200CBX.

Equipment: Cee 200CBX
Application: Microfabrication, Photonics

Paper · 2020 · Journal of Materials Research

Flexible low-voltage paper transistors harnessing ion gel/cellulose fiber composites

Low-voltage flexible transistors were made on paper using ion gel and cellulose fibre. A Cee 200 spun a PDMS adhesion layer onto glass at 1000 rpm for the shadow masks.

Equipment: Cee 200
Application: Flexible Electronics, Microfabrication
Materials: PDMS
Substrate: Glass

Patent · 2018 · Brewer Science — Published Patent Examples

Dual-layer bonding material process for temporary bonding of microelectronic substrates to carrier substrates

A two-layer bonding material for temporarily attaching device wafers to carriers. A Cee 200CB coated the polymer bonding layers in the worked examples.

Equipment: Cee 200CB
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: SU-8, Temporary Bonding Adhesive

Paper · 2014 · TriQuint and Brewer Science, CS MANTECH

Improvements in Thin Wafer Handling – Equipment and Material Impacts

A conference paper on improving thin wafer handling through equipment and materials. A Cee 1300CSX thermal slide debonder was part of the tool set.

Equipment: Cee 1300CSX
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive

Thesis · 2014 · Istanbul Technical University Thesis

Optimization of 0.3 µm Photolithography Process Steps on Polysilicon

A thesis optimising each step of a 0.3 µm lithography process on polysilicon. Resist and anti-reflective coatings were applied on a Cee 200X and developed on a Cee 200XD.

Equipment: Cee 200X, Cee 200XD
Application: Lithography, Microfabrication
Materials: Antireflective Coating, Photoresist

Thesis · 2012 · RIT ScholarWorks

A Silicon p-i-n Detector for a Hybrid CMOS Imaging System

A silicon p-i-n detector was made for a hybrid CMOS imaging system. Resist was coated on a Cee 100 spinner and developed on a Cee 100 developer.

Equipment: Cee 100
Application: Lithography, Sensor
Materials: Photoresist
Substrate: Si

Paper · 2022 · PubMed Central

Impedance Sensing of Antibiotic Interactions with a Pathogenic E. coli Outer Membrane Supported Bilayer

An impedance sensor was built on a bacterial outer membrane to study how antibiotics interact with it. PEDOT:PSS was spun at 2500 rpm on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Bio Sensing Devices, Sensor
Materials: PEDOT:PSS
Substrate: Glass

Paper · 2022 · Microsystems & Nanoengineering (Springer Nature)

Scalable and automated CRISPR-based strain engineering using droplet microfluidics

A droplet microfluidic platform that automates CRISPR strain engineering. A Cee 100 coated a 5 µm SU-8 dielectric layer over the metal electrodes on glass.

Equipment: Cee 100
Application: Microfabrication, Microfluidics
Materials: SU-8
Substrate: Glass

Patent · 2019 · Brewer Science — Published Patent Examples

Laser-releasable bonding materials for 3-D IC applications

Bonding materials released by laser are described for 3D IC stacking. An Apogee bonder joined two 100 mm glass wafers at 230°C and 1800 N for three minutes.

Equipment: Apogee bonder
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive
Substrate: Glass, 100 mm

Patent · 2025 · Brewer Science — Published Patent Examples

Temporary bonding and debonding process to prevent deformation of metal connection in thermocompression bonding

A temporary bonding and debonding process that stops copper pillars deforming during thermocompression bonding. An Apogee bonder bonded device wafers to glass carriers and then ran the thermocompression test at 300°C.

Equipment: Apogee bonder
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: BrewerBond, Temporary Bonding Adhesive
Substrate: Glass, 100 mm

Paper · 2021 · Brewer Science — iMAPS Device Packaging Conference

A Low Tg Bonding Material for use with Wafer-Level System-in-Package (WLSiP) and Fan-Out Wafer Level Packaging (FOWLP) Processes

A conference talk on a temporary bonding material with a low glass transition for system-in-package and fan-out work. A Cee mechanical debonder released the bonded stacks.

Equipment: Cee spin coater (model not given)
Application: Advanced Packaging, Temporary Bonding & Debonding
Materials: Temporary Bonding Adhesive

Paper · 2025 · STAR Protocols (Cell Press)

Protocol for fabrication and utilization of the device for axon-cancer cell interaction testing

A protocol for making microfluidic devices to study how axons and cancer cells interact. Two SU-8 layers on a 100 mm wafer were coated on a Cee 200X, the first finishing at 4000 rpm.

Equipment: Cee 200X
Application: Bio, Lithography, Microfluidics
Materials: SU-8
Substrate: Si, 100 mm

Paper · 2026 · Langmuir (American Chemical Society)

Experimental Observations of Graphene at Phospholipid Monolayers

Graphene particles were tracked at phospholipid monolayers to study how they interact with membranes. About 1.2 µm of AZ 1512 was coated on a Cee 200CB to pattern the graphene.

Equipment: Cee 200CB
Application: Bio, Lithography, Material Science
Materials: AZ1512

Paper · 2022 · MethodsX (Elsevier)

Fabrication methods for high reflectance dielectric-metal point contact rear mirror for optoelectronic devices

Methods for making high-reflectance rear mirrors with point contacts for thermophotovoltaic cells. A Cee spin coater and hotplate handled the SU-8 spacer and lithography steps.

Equipment: Cee spin coater (model not given)
Application: Lithography, Material Science, Photonics
Materials: Photoresist, SU-8

Paper · 2015 · Nature Communications (Springer Nature)

Towards outperforming conventional sensor arrays with fabricated individual photonic vapour sensors inspired by Morpho butterflies

Photonic vapour sensors inspired by butterfly wing scales were made and compared with conventional sensor arrays. A Cee 200 coated the 100 nm PMMA and copolymer layers in the multilayer stack.

Equipment: Cee 200
Application: Nanofabrication, Photonics, Sensor
Materials: Photoresist, PMMA
Substrate: Si

Paper · 2017 · Scientific Reports (Springer Nature)

A sacrificial layer strategy for photolithography on highly hydrophobic surface and its application for electrowetting devices

A sacrificial layer lets photoresist be patterned on very water-repellent fluoropolymer, for electrowetting displays. A Cee 200 coated the CYTOP and photoresist.

Equipment: Cee 200
Application: Lithography, Microfluidics, Photonics
Materials: CYTOP, Photoresist, SU-8
Substrate: Glass

Paper · 2016 · Nanoscale (Royal Society of Chemistry)

Directing lineage specification of human mesenchymal stem cells by decoupling electrical stimulation and physical patterning on unmodified graphene

Patterned graphene substrates were used to separate the effects of electrical stimulation and surface shape on stem cell fate. AZ 5214 was spun at 4000 rpm on a Cee 200CB.

Equipment: Cee 200CB
Application: Bio, Lithography, Material Science
Materials: AZ5214

Paper · 2026 · Microsystems & Nanoengineering (Springer Nature)

Advancing neural interfaces: a framework for the fabrication and characterization of freestanding micro-nanodevices

A framework for making and testing freestanding micro and nanodevices for neural interfaces. AZ 3312 and other resists were coated on a Cee 200X and a Cee 200X-F across three process flows.

Equipment: Cee 200X, Cee 200X-F
Application: Bio, Lithography, Nanofabrication
Materials: AZ3312
Substrate: Si, 100 mm, 150 mm

Paper · 2019 · Scientific Reports (Springer Nature)

Characterisation of graphene electrodes for microsystems and microfluidic devices

Graphene electrodes were characterised for use in microsystems and microfluidic devices. SU-8 was coated on copper-coated glass slides on a Cee 200X with a two-step recipe.

Equipment: Cee 200X
Application: Lithography, Material Science, Microfluidics
Materials: SU-8
Substrate: Glass

Paper · 2021 · Nature Communications (Springer Nature)

A digital single-molecule nanopillar SERS platform for predicting and monitoring immune toxicities in immunotherapy

A digital SERS platform using silicon nanopillars to predict and track immune toxicity. An Apogee coater spun two PMMA layers at 1500 rpm on four-inch wafers for electron-beam patterning.

Equipment: Apogee spin coater, Cee spin coater (model not given)
Application: Bio Sensing Devices, Nanofabrication, Sensor
Materials: PMMA
Substrate: Si, 100 mm

Facility page · 2026 · Stanford Nano Shared Facilities

Cee® Apogee® E-Beam Resist Coating – Stanford Nanopatterning Cleanroom

A university nanopatterning cleanroom page for its Apogee spin coaters, one of them kept for standard electron-beam resists.

Equipment: Apogee spin coater, Cee spin coater (model not given)
Application: Lithography, Nanofabrication, Open Facility
Materials: HSQ, Photoresist, PMMA

Procedure or protocol · 2023 · Washington State University Vancouver Cleanroom

Cee® 200 Spin Coating SOP – Washington State University Vancouver

A university cleanroom operating procedure for a Cee 200 spin coater, covering recipe choice, loading and photoresist coating.

Equipment: Cee 200
Application: Lithography, Microfabrication
Materials: HMDS, Photoresist

Procedure or protocol · 2025 · George Mason University Nanofabrication Facility

Cee® X-Pro II Photoresist Workstation SOP – George Mason University

A university nanofabrication facility operating procedure for its X-Pro II photoresist workstations. Separate positive and negative resist stations each hold spin coating, baking and development.

Equipment: X-Pro II workstation
Application: Lithography, Nanofabrication, Open Facility
Materials: Photoresist

Paper · 2021 · Micromachines (MDPI)

Toward Development of a Higher Flow Rate Hemocompatible Biomimetic Microfluidic Blood Oxygenator

A biomimetic microfluidic blood oxygenator with higher flow rate. Thin silicone membranes were spun on a polished 300 mm wafer on a Cee 300X, aiming for 50 µm.

Equipment: Cee 300X
Application: Bio, Microfluidics
Materials: NuSil Silicone
Substrate: Si, 300 mm

Paper · 2025 · Nature Communications (Springer Nature)

Information advantage in sensing revealed by Fano-resonant Fourier scatterometry

Silicon metarings were made for optical sensing by Fano-resonant scatterometry. HSQ was spun to 60 nm at 8000 rpm on an Apogee 200.

Equipment: Apogee spin coater
Application: Lithography, Nanofabrication, Photonics, Sensor
Materials: HSQ
Substrate: Glass

Paper · 2023 · Polymers (MDPI)

Off-Stoichiometry Thiol–Ene Polymers: Inclusion of Anchor Groups Using Allylsilanes

Thiol-ene polymers with allylsilane anchor groups were developed to bond to silicon. The prepolymers were coated onto silicon on an Apogee spin coater module.

Equipment: X-Pro II workstation
Application: Bio, Microfluidics
Materials: OSTE-AS Polymer
Substrate: Si, 100 mm

Paper · 2025 · Small Structures (Wiley).

Omnidirectional Circularly Polarized Thermal Radiation Enabled by Chiral Metasurface

A chiral metasurface that emits circularly polarised heat radiation in all directions. PMMA was coated on an Apogee spin coater and baked on an Apogee bake plate.

Equipment: Apogee bake plate, Apogee spin coater
Application: Sensor
Materials: Photoresist, PMMA

Paper · 2025 · Preprints.org

Microfluidic Bioelectrochemical Cell Platform for the Study of Extracellular Electron Uptake in Microbes

A glass microfluidic platform for studying how microbes take up electrons from electrodes. HMDS primer was spun onto 100 mm borosilicate wafers on an Apogee spin coater.

Equipment: Apogee spin coater
Materials: AZ4620, HMDS, LOR10B, PDMS, Photoresist, S1805, SU-8
Substrate: Borosilicate Glass, 100 mm

Thesis · 2025 · University of Minnesota, M.S. thesis by Issahaku Walaman-i

Design and Fabrication of an Electronic Skin Sensor and Sensor Array for Contact Pressure Monitoring during Colonoscopy

A flexible electronic skin sensor array was designed to monitor contact pressure during colonoscopy. AZ 10XT resist was coated onto silicon on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Bio Sensing Devices
Materials: AZ10XT
Substrate: Si, 100 mm

Paper · 2017 · Journal of Microelectronics and Electronic Packaging, Vol. 14, Issue 1

Temporary Wafer Bonding Materials with Mechanical and Laser Debonding Technologies for Semiconductor Device Processing

Temporary bonding materials were tested with both mechanical and laser debonding. An Apogee mechanical debonder handled the mechanical release of 200 mm wafers.

Equipment: Mechanical debonder
Application: Temporary Bonding & Debonding
Materials: BrewerBond
Substrate: Glass, Si, 200 mm

Thesis · 2021 · University of Colorado Colorado Springs, Ph.D. dissertation by Olha Melnyk

Fast Switching Liquid Crystal Materials: From Design to Biomedical Application

Fast-switching liquid crystals were developed for optical filters and biomedical microscopy. The polyimide alignment layer was spun onto ITO glass on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Bio
Materials: Nissan Chemicals ER-1744, Polyimide
Substrate: Soda Lime Glass

Paper · 2024 · International Electric Propulsion Conference

Flat-panel Pixel Electrospray Thrusters for Increased Reliability and Efficiency: Preliminary Design and Testing

Flat-panel electrospray thrusters with pixelated emitters were developed for spacecraft. SU-8 2005 was spun onto porous glass on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Microfabrication
Materials: SU-8
Substrate: Glass, Silicon Dioxide Porous Glass

Paper · 2025 · Polymers (MDPI)

The Role of Time in the Structural Ordering of Poly-3-Hexylthiophene

How annealing time affects the structure of P3HT films was studied. The films were spun from chloroform at 600 rpm onto glass squares on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Material Science
Materials: rr-P3HT dissolved in chloroform
Substrate: Glass, 20 x 20 mm

Facility page · The Advanced Science Research Center, CUNY Graduate Center

Lithography – The Advanced Science Research Center Nanofabrication Facility

A university nanofabrication facility lithography page listing several Cee coating systems, one for electron-beam resists and others for photoresist.

Equipment: Cee spin coater (model not given), Cee hotplate (model not given)
Application: Lithography, Nanofabrication, Open Facility
Materials: E-beam, Photoresist

Facility page · BioNIUM, University of Miami

Tools – BioNIUM Nanofabrication Facility

A university nanofabrication facility tool list that includes a Cee 200X spin coater.

Equipment: Cee 200X
Application: Lithography, Nanofabrication, Open Facility

Paper · 2004 · Georgia Institute of Technology / Journal of The Electrochemical Society

Direct Photopatterning of Metal Oxide Structures Using Photosensitive Metallorganics

Mixed metal oxide films were patterned directly with light using photosensitive metallorganic precursors. The precursor films were spun onto 100 mm silicon on a Cee 100.

Equipment: Cee 100
Application: Lithography
Materials: MIBK
Substrate: Si, 100 mm

Facility page · University of Kansas Nanofabrication Facility

Cee® Spin Coater & Baking Tools – University of Kansas Nanofabrication Facility

A university nanofabrication facility page for its coat and bake tools: a Cee 200CBX spin coater, a Cee 1300X hotplate and an Apogee hotplate.

Equipment: Cee 200CBX, Cee 1300X
Application: Nanofabrication, Open Facility

Facility page · University of Michigan Lurie Nanofabrication Facility

Cee® Lithography Tools – Lurie Nanofabrication Facility

A university nanofabrication facility directory listing several Cee tools for coating and developing, including Apogee spin coaters.

Equipment: Cee 200, Cee 200X
Application: Lithography, Nanofabrication, Open Facility
Materials: AZ12XT, AZ726, KMPR, LOR10B, Photoresist, S1813, SPR220, SPR995
Substrate: 100 mm, 125 mm, 150 mm, 200 mm, 50 mm, 75 mm

Facility page · 2004 · Cornell NanoScale Facility, Cornell University

New Equipment at CNF – Cee® Model 100 Spin Coaters

A university facility newsletter announcing two bench-top Cee 100 spin coaters for resist coating on substrates up to 200 mm.

Equipment: Cee 100
Application: Open Facility

Paper · 2019 · Washington University in St. Louis, MEMS 500 Independent Study report by X. Jiang.

Fundamentals of microfluidics fabrication process and the basic process flow of fabrication

A university report on the basic process flow for making microfluidic devices. AZ 4620 resist was coated on a Cee 200X.

Equipment: Cee 200X
Application: Microfluidics
Materials: Acetone, AZ4620, DI Water, IPA
Substrate: Si, 100 mm

Facility page · University of Kentucky Center for Nanoscale Science and Engineering (CeNSE)

Spin Coating – University of Kentucky CeNSE

A university facility page on spin coating that names its Cee spin coaters and describes the bowl and chuck materials.

Equipment: Cee 100
Materials: Photoresist

Facility page · 2025 · AggieFab (Texas A&M University)

Cee® Automatic Developer – Texas A&M AggieFab

A university cleanroom page for its Cee automatic developer, used to develop photoresist after exposure.

Equipment: Apogee spin developer
Application: Nanofabrication, Open Facility
Materials: AZ400K, Developer, DI Water, IPA, MIF300, MIF319, SU-8 Developer

Facility page · University of Pennsylvania Singh Center for Nanotechnology (Penn Nano)

Nanofabrication Equipment & Instrumentation – Penn Nano

A university nanofabrication centre equipment page showing a Cee 200X in its spinner and solvent area.

Equipment: Cee 200X
Application: Open Facility

Facility page · University of Kansas Nanofabrication Facility

PDMS Spin Coater – University of Kansas Nanofabrication Facility

A university nanofabrication facility page for a Cee spin coater kept for PDMS, used to control film thickness for soft lithography.

Equipment: Cee spin coater (model not given)
Application: Open Facility
Materials: PDMS

Facility page · 2025 · Washington University in St. Louis, Institute of Materials Science & Engineering (IMSE)

Lithography Equipment – Washington University in St. Louis Micronanofabrication Facility

A university nanofabrication facility lithography page listing Cee spin coaters and hotplates for resist coating and baking.

Equipment: Apogee spin coater
Application: Lithography, Nanofabrication, Open Facility

Facility page · 2022 · University of Utah Nanofab

Cee® 100 Spin Coater – Utah Nanofab Wiki

A university nanofab wiki page for its Cee 100 spin coater, used for photoresist coating.

Equipment: Cee 100
Application: Lithography, Nanofabrication, Open Facility
Materials: Photoresist

Facility page · University of Pennsylvania Singh Center for Nanotechnology (Penn Nano)

Cee® Apogee® Spin Coater – Penn Nano Wiki

A university nanofabrication wiki page for its Apogee spin coater, a programmable tool for photoresist on wafers up to six inches.

Equipment: Apogee spin coater
Application: Nanofabrication, Open Facility
Materials: Photoresist
Substrate: 100 mm, 125 mm, 150 mm, 50 mm, 75 mm

Facility page · University of Houston NanoFabrication Facility (UHNF)

Spin Coating – University of Houston NanoFabrication Facility

A university nanofabrication facility page on spin coating with its Cee spin coater, for photoresist and other thin films.

Equipment: Cee spin coater (model not given)
Application: Open Facility
Materials: Photoresist

Facility page · 2026 · Arizona State University Core Research Facilities, NanoFab

Cee® Spin Coater #1 and #2 – ASU NanoFab

A university nanofabrication facility page for two Cee spin coaters, one with a programmable hotplate bake.

Equipment: Cee 200CBX
Application: Lithography, Nanofabrication, Open Facility
Materials: Photoresist
Substrate: 100 mm, 125 mm, 150 mm, 200 mm, 50 mm, 75 mm

Facility page

Cee® Apogee® Spin Coater – LNF Wiki

A university nanofabrication wiki page for its Apogee spin coater, a programmable manual-dispense tool that takes pieces and four and six-inch wafers.

Equipment: Apogee spin coater
Application: Nanofabrication, Open Facility
Materials: AZ12XT, KMPR, Photoresist, S1813, SPR220, SPR995
Substrate: 150 mm

Facility page · LNF Wiki, University of Michigan Lurie Nanofabrication Facility

Cee® 200X Photoresist Spinner 1 – LNF Wiki

A university nanofabrication wiki page for its Cee 200X, a programmable spinner with automatic dispense for four and six-inch wafers.

Equipment: Cee 200X
Application: Nanofabrication, Open Facility
Materials: AZ12XT, SPR220
Substrate: SiC

Thesis · 2019 · University of Queensland

Design of microscale devices for the detection of melanocytic growths in the skin

A thesis on microscale devices for detecting melanocytic growths in skin. A Cee spin coater was used to coat the silicon wafer.

Equipment: Cee spin coater (model not given)
Application: Bio Sensing Devices
Materials: OmniCoat, SU-8

Thesis · 2016 · Nanyang Technological University, School of Mechanical and Aerospace Engineering; PhD thesis by Teo Jian Tong Adrian

Optical Sensors for High Sensitivity Motion Detection

An optical MOEMS seismic sensor made by double-sided deep etching of SOI. AZ 9260 resist was coated after HMDS priming on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Sensor
Materials: Photoresist
Substrate: Si, SOI, 150 mm

Paper · 2006 · Ciprian Iliescu et al. ResearchGate

A dielectrophoretic chip packaged at wafer level

A dielectrophoretic chip was packaged at wafer level by bonding silicon to glass with imprinted SU-8. The SU-8 was spun on a Cee spin coater.

Equipment: Cee spin coater (model not given)
Application: Advanced Packaging
Materials: SU-8
Substrate: Glass, Si

Paper · 2025 · bioRxiv preprint

DNA origami directed nanometer-scale integration of colloidal quantum emitters with silicon photonics

DNA origami was used to place colloidal quantum emitters precisely on silicon photonic structures. The resist for the placement cavities was coated on an Apogee spin coater.

Equipment: Apogee spin coater
Application: Photonics
Materials: nLOF 2020, PMMA
Substrate: Si

Facility page · MIT Fabtools

Cee® 200X and 200X-F Spin Coaters – MIT Fabtools Listing

A university fabrication tools listing that includes Cee 200X and 200X-F spin coaters.

Equipment: Cee 200X
Application: Nanofabrication, Open Facility

Facility page · Washington Nanofabrication Facility, University of Washington

Cee® Apogee Spin Coater – Washington Nanofabrication Facility

A university nanofabrication facility tool list that includes an Apogee spin coater in its lithography area.

Equipment: Apogee spin coater
Application: Nanofabrication, Open Facility

Facility page · University of Utah Nanofab

Cee® Lithography Tools – Utah Nanofab

A university nanofab listing several Cee tools across its lithography line, including Cee 100 and 200X spinners, a 200XD developer and Apogee coaters and bake plates.

Equipment: Cee 200X
Application: Nanofabrication, Open Facility
Materials: Antireflective Coating, AZ Barli II, AZ40XT, AZ9260, HMDS, LOR10B, maP 1275, MiR 701, nLOF 2020, S1813, SU-8

Facility page · Cornell NanoScale Facility, Cornell University

Cee® Lithography Support Tools – Cornell NanoScale Facility

A university nanoscale facility page for its Cee lithography tools: 1300X proximity hotplates, Apogee spin coaters and a flange-mounted Cee 200.

Equipment: Cee 1300X, Cee 200
Application: Edge Bead Removal (EBR), Nanofabrication, Open Facility
Materials: Microposit EBR 10A
Substrate: 100 mm, 125 mm, 150 mm, 200 mm, 50 mm, 75 mm

Thesis · 2024 · University of Southampton, Doctoral Thesis by Dongkai Guo

Neuromorphic Computing of SiC Based Memristor

A thesis on silicon carbide memristors for neuromorphic computing. S1813 resist was coated on an Apogee spin coater and baked on an Apogee bake plate.

Equipment: Apogee bake plate, Apogee spin coater
Application: Material Science
Materials: AZ2070, S1813
Substrate: Si

Facility page · 2025 · AggieFab (Texas A&M University)

Cee® Apogee® Lithography Workflow – AggieFab Nanofabrication Facility

A university cleanroom with a complete Cee lithography line of Apogee spin coaters, bake plates and developers, used for SU-8 and other resists.

Equipment: Apogee bake plate, Apogee spin coater, Apogee spin developer
Application: Lithography, Nanofabrication, Open Facility
Materials: Photoresist, PMMA, Polyimide, SU-8
Substrate: 150 mm

Paper · 2024 · Science Advances (American Association for the Advancement of Science)

Flexible Near-Field Electronics for High-Resolution Biosensing

Flexible near-field electronic biosensors were made with spin-coated SU-8 and AZ 3310. The resists were coated on a Cee 200X-F and an Apogee spin coater.

Equipment: Cee 200X
Application: Flexible Electronics
Materials: AZ3310, Photoresist, SU-8

Summaries are written by SiSTEM Technology from the published sources. Process details are the authors’ own conditions, so check the original before using them.